Видео

I cannot unlock to ring so that I could use the item on larger jar lids. It's's stuck on lock. Please help me

Thumbs up. I have a near identical camera that uses the same firmware and I wanted to use the fill light for video but it does not mention in the manual to hold down the button for continuous light, it only says to press the button for a flash. Thanks for pointing this out!

Great straight to the point. Made my first use of the paper easy. Love the no time wasted approach.

Does it fit sleeved cards side by side?

My 2016 Nissan Leaf shows a Red exclamation point in a Red triangle but that goes away when I am driving the car & comes back on when at idle or when I put in park. What does that red master warning light mean?

Nice review my friend, it has been very helpful to me in order to choose the right size for these boots!! Thanks a lot.

I have just broken Ravemen PR1200 looking at your video. My takeaways are: 1) It's super difficult (SUPER) to move the board and the cell inside the metal case. Without careful unsoldering the batteries you either break the cables on one or the other side of the batteries (I just did). 2) Batteries used in PR1200 are: FST 18650-2600 mAh CAP: 2600 mAh, VOL: 3.6V/4.2V 8E32520 017929 made in China. They are identical. 3) To remove the board you have to remove bigger button (rubber, which is very prone to damage while doing it + slighty flexible plastic "holder" for the rubber. It was blocking the board to be removed. Overall score for self-repairs: 1/10 Without being super careful, having great skills in soldering and being super patient, it's almost impossible to change the batteries. is it doable? Yes. Is it worth the risk? No. No at all. I love my 2nd and 3rd PR1200 light, but I thought that I will be able to replace dead batteries on the oldest one (from 2017 according to board description). UPDATE: The plastic part with port is different between older and newer PR1200. I wasn't able to replace older part with newer, because the ports are further from each other. I wanted to replace the one with lost rubber seals with the one that had them intact (above mentioned and broken). In the end I had to dremel out the micro-USB port to make it wider :) It doesn't look good, but it works!

Rather than a dead short, I recommend that a series resistor in between the battery and the meter to create a voltage drop and save the fuse. I use a cheap 200 ohm linear potentiometer which can be adjusted so a fresh battery with good voltage can draw about 500 ma. A bad battery will not draw even that with the pot turned to minimum (zero amps) as you showed. A double A 1.3 volt rechargeable battery should be good for about 1,300 maH. Not sure but a dead short even for a second could be hard on the battery even for a NMiH. Good video!

Is it sharp?

Great video! Is this compatible with the new tree root travel photography tripod?

Thank you for the review. I am purchasing one of these lights to use as a nightstand light. I needed a light that was red, easily and positively dimmable, and small. I am going to use it so I can see well enough to avoid the mine field of doggies, doggie plush toys, flip flops, and other night time navigation hazards that await me between our bed and the bathroom or kitchen. Again, thanks for the comprehensive review.

Hey did this ever fully cure?

No timekeeping functions yet

centergrade? don't you mean Celsius you living in the 1940s still? lol

does it work as a clock or not yet?

Build own power 🔋 station much better

Can this connect with a PC/Laptop and be used for TEAM calls and Zoom calls?

What's the high, mid, low useful for?

I can still use this like a regular fridge, isnt it? I only bought this for my dorm room, not for travelling

Thank you for this. I just got mine from delivery yesterday.

Thanks for this. I was curious as to what the USB port was capable of outputting, but nobody seems to be showing this. The thermal cam was an added bonus! lol

Can you tell me why mine says it is running at 26.7 volts? Is That normal if it’s plugged into a 12 volt power station?

Great video and a great description of your process.

yea nintendo expects you use their dock which requires power, so every dock for the switch requires power. You do need to be careful though, as in the past some switch docks have fried switches. the switch isn't technically using all the standards the correct way and the voltage it needs to have has to be the exact same as the real charger/dock.

So you think the sound of the mics is accpatable on linux ?

Very informative video. Appreciate your effort.

Thanks for the heads up. Just bought mine yesterday. I didnt realise it was like a gundam assembly 😅😢😢.

Great video : )

What were your actual/full settings?

I lost my frame to a house fire and I bought a new one and all I am trying to do is copy the old frame do you have any ideas.

Looks like a pretty nice rig for $70.

Ever test it for moving gravel of lawns near driveways?

Nice vid bud!!

Nice design! May have to copy if I can get the Banshee that is for sale nearby. Thanks for posting.

I remember when those plastic ones were popular. My mom got one at an event and I hated using it for hot drinks because by the time I got to school 30min away my drink was cold lol. How easy is it to thoroughly clean the Meoky lid? It looks like the screw crevice would be a problem and possibly the hinge of the flap? I love to find new quality cups and mugs but have to be able to easily clean the lids without missing bacteria loving crevices if I am using them daily.

The look on that boy's face is priceless. I'm thinking of getting one from CList.

Happened to ne too. Thank you.

How is it after it got wet and got dirt on it? Easy to clean, and does the suction still work well?

Is there any distortion or issues with photo images?

GREAT we printed the same model, but an advice, i see trace of support, i recommend you to use sandpaper Number 320 and after that something more smooth. we need to do it specially if our printer sometimes does those weird segments (you know those one below, its looks like the model moved for some reason, my 3d printer has the same thing) i was looking for this video, but mostly cuz i wanted to know how to paint the flame I LOVE THIS VIDEO :D

I just bought one of these things on amazon for an alarm clock, and im already thinking about tearing it apart to replace the beep beep alarm sound with a sound recording module im gonna get on amazon so i can play whatever i want

So is it the inside temperature that it shows? I don't see sensor for outside

Thank you for this, Jay! I must’ve undone the configuration and now I cannot get the center column back to factory settings!

How do i set this as my default input for my amazon seller account?

Question: where your hand is, does that Black part get Cold and Wet while using ? Mine is. I want to know if it safe ? Thanks

We now know where the term "Cast Iron Stomach" comes from.

Does it work if i charge it type c to type c?

How do you handle the sludge building up on the walls and Bottom of the tube? Mine is almost completely clogged by now :(

This might sound dumb I saw the new season and now I feel as if I need this lol. I know you said it wasn't that durable but exactly how much do you think it can withstand without breaking? (BTW love your stuff)

The most awkward instruction video I have seen in awhile...